EOI Offers complete NIST Traceable Thermometric or Radiometric Calibration for all Infrared Sources. As part of the Calibration we will re-coat the emitting surface of the source to ensure the highest possible emissivity. The supply will also include Calibration Data Reports.

EOI offers "Calibration Kits" for those users interested in performing Calibrations at their facility.

EOI offers Repair Evaluation and Repair Service for all EOI Products. All work is completed on site at EOI’s facilities in Santa Barbara, California. After repair work is done we will provide you with a Repair Summary Report.

Most image processing and analysis is now done exclusively in the digital realm, effectively dictating the phasing out of film based cameras in favor of new high performance digital imaging systems.

Digital camera imaging must be evaluated objectively. Manufacturer specifications alone are not sufficient to properly ascertain actual camera performance. Objective testing is achieved using a standard test setup including a calibrated integrating sphere, certified targets, and a precision optical relay system. The integrating sphere provides uniform stable target illumination. The target image plane is relayed onto the camera sensor array and captured for processing. A complete test set includes assessment of spatial resolution, sensitivity, uniformity, signal to noise ratio, modulation transfer function, and intrascene dynamic range.

A standardized digital camera imaging evaluation will be imperative when comparing systems of similar specification. Testing results will also serve to prove the validity of data acquired from camera systems on hand.

Please contact EOI’s Customer Service Representative for further information on any of the above services. (805) 964-6701 or email us by clicking here.

If you are calling to return a system for any of the above services please have the model numbers and serial number of your system ready and we will provide you with an RMA (Return Material Authorization) number.